Lathem Digital Wall Clocks

Lathem digital display clocks combine precision and flexibility for a perfect fit for any company.

The digital display clocks can be used as a stand-alone system or as a secondary to virtually any master controlled system.

This flexibility allows you to install additional clocks or replace worn clocks in an existing analog system. An optional RS485 port allows automatic correction from Lathem's new Mini-master. The four-digit display is highly visible from 100 feet. The selectable time display is 12 hours and minutes with PM indicator, or 24 hours and minutes.        The unit can be mounted directly to the wall or to a single gang outlet box. With other kits, it can also be dual wall or dual ceiling mounted. A vented hole plug is provided for 1/2-inch conduit. During power failures a 9-volt alkaline battery provides continuous timekeeping. When power resumes, the display illuminates the correct time. As with all Lathem products, service, reliability and flexibility all add up to make these digital display clocks perfect for any business environment.

Lathem Analog Wall Clocks

Attractive and extremely easy to read, Lathem analog wall clocks are available in a variety of faces, sizes and mounting styles.

Fine brass movements provide silent, trouble-free operation. Hidden stem sets are mounted behind the case top to prevent tampering.

Sizes While the 12-inch round case is standard in surface, semi-flush, or double face mounts, other sizes and shapes are available to complement every decor. Optional cases available are: 10" round or square, 12" square and 15" round. Mountings Surface Mount Clocks fasten either directly on a wall or base outlet (single or double gang wall box). Mounting brackets are supplied that secure the clock by a locking nut from the top. Semi-Flush Mount Clocks fasten directly on the wall, using a special box and adaptor plate furnished with each clock. The clock extends 7/8" from the wall. Double Face Mount Clocks can be hung from the ceiling or wall, and require a special box and adaptor plate that is furnished with each clock. Other Features A 1-rpm motor and a corrective coil provide longer service life because of their smooth running characteristics. Secondary clocks are synchronous 3-wired clocks with a sweep second hand to mark the fractions of a minute. The minute impulse clock is wired to a master control unit as required. Clock guards are available in two sizes. These attractive yet rugged wall clocks are trouble-free and styled to fit well in any decor. Call Today For Special Internet Pricing......

Revised: November 07, 2005 02:39:47 PM .