Home > Access Control > Jantek JSR-200 Stand Alone Access Control
Jantek JSR-200 Stand Alone Access Control	Jantek JSR-200 Stand Alone Access Control TEK Price: $695.00 Availability: Usually Ships in 24 to 48 Hours Product Code: JSR-200 Qty:

Description Product Details   Jantek JSR-200 Stand Alone Access Control The JSR-200 is a stand alone, single door controller, using ISO ABA Track II Mag Stripe card reader and card. Operation modes are Card only, Keypad only, Card with Keypad or Facility Code only. Card capacity is 9,999 users. Programmable door release time from 1~250 seconds through Control Card. Specifications Display Red-power pilot, Green-access granted, Yellow-alarm Keypad 3 x 4 Flat membrane Power requirement DC12V 1Amp Inputs 1 Tamper switch, 1 Door open detect, 1 Alarm loops and 1 Push button Power 4W Operating temperature 32°F~122°F(0°C~50°C) Humidity 20%~90%RH Dimensions 12.5(L) x 9.0(W) x 3.2(H) cm Weight 1.54 LBS (0.7Kg) Features : Standalone, single door control. Using ISO ABA Track II Mag Stripe card reader and card. Operating Mode: Card only, Keypad only, Card with Keypad or Facility Code only. Card capacity is 9,999 users. Programmable door release time: 1~250 seconds Access code can be added or deleted using control card. Enable/disable alarm loop through Control Card. Built-in Watch Dog, the system never hang. Built-in tamper switch detects when case is forced open. Built-in electric buzzer for audible card entry and programming. Data is protected even after power failure. Machined Zinc housing in high durable. With hidden code function under keypad only open door mode.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item: Access Control Manufacturers > Jantek Manufacturers > Access Control